Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Verifying TX Matrix Plus Router Parts Received

 

A packing list is included in each shipment. The packing list specifies the part numbers and descriptions of each part in your order.

To verify that you have received all parts:

  1. Verify that the items on the packing list are included in the parts in the main shipment (see Table 1).
  2. Verify that all parts for the four-post rack and open-frame rack (see Table 2 or Table 3) have been received.
  3. Verify that all parts for the cable management system (see Table 4) have been received.
    • For TXP-F13 SIBs, you can use either the cable management system.

    • For TXP-F13-3D SIBs, the cable management system (model number CBL-MGR-TXP-3D-SFC) is required.

  4. Verify that all parts in the accessory box (see Table 5) have been received.
  5. Verify that all parts in the tool kit have been received.
    • For TXP-F13 SIBs and TXP-T1600 SIBs, see Table 6 (model number TXP-TOOLKIT).

    • For TXP-F13-3D SIBs and TXP-LCC-3D SIBs, seeTable 7 (model number TXP-TOOLKIT-3D).

  6. If any part is missing, contact a customer service representative.

Table 1: TX Matrix Plus Router Parts List

Component

Quantity

Chassis, including midplane, craft interface, and center-mounting brackets

1

F13 SIBs (TXP-F13 SIBs or TXP-F13-3D SIBs)

up to 10

F2S-SIBs (TXP-F2S SIBs or TXP-F2S-3D SIBs)

20

Routing Engines

1 or 2

TXP-CBs

1 or 2

Power supplies

2

TXP-CIP

2

Front fan trays

2

Rear fan trays

4

Quick Start installation guide

1

Blank panels for slots without components installed

One blank panel for each slot not occupied by a component

Table 2: TX Matrix Plus Four-Post Rack Mounting Hardware Parts List

Component

Quantity

Four-post rack mounting shelf

1

Four-post rack rear support bracket

1

Table 3: TX Matrix Plus Open-Frame Rack Mounting Hardware Parts List

Component

Quantity

Open-frame two-post rack bottom mounting shelf

1

Note: The two-post rack mounting shelf is shipped in three parts that must be assembled.

Open-frame two-post rack mounting shelf flanges

2

Table 4: TX Matrix Plus Cable Management System Parts List

Part

Quantity

Comb assembly support (right and left)

2

Comb assembly

1

Cable manager support shelves (upper, middle, and lower)

3

Cable management system arms (two left and two right)

4

Phillips screws, number 2

28

Front cable management system

1

Tie wraps for the securing the switching plane cables

6

Table 5: TX Matrix Plus Accessory Box Parts List

Part

Quantity

Juniper product ROHS and warranty documents

1

Software license agreement

1

Affidavit for T1 connection

1

Connectors for alarm relay cables Terminal Block Plug, 3 Pole, 5.08 mm spacing, 12A

4

4-AWG DC power and grounding cable lugs

30 (28 for power—14 for each power supply, 1 for grounding, and 1 spare)

ESD wrist strap with cable

1

Read-me-first document

1

Screws to fasten grounding cable to chassis—Phillips, 1/4-20 x 3/8

2

Screws to mount chassis Phillips, 12-24 x 1/2", self-tapping

Bag of 14

6-ft serial cable to connect to a management console (RJ-45 Rollover, RJ-45 Jack to Female DB-9)

1

DB-9 (male) to DB-25 (female) adapter for the serial cable

1

15-ft Ethernet cable to connect to a management device (RJ-45 connectors, 4-pair stranded UTP, Category 5E)

1

Split washers for the grounding cable lug

2

PCMCIA Card holder and hook-and-loop fasteners (male 1 of each and female)

1 of each

Accessory Kit Label, Green "Small Parts Enclosed"

1

Label, Accessory Contents, TX Matrix Plus

1

Blank labels for the switching plane cables

1

Table 6: TX Matrix Plus Tool Box Parts List for TXP-F13 SIBs and TXP-T1600 SIBs

Part

Quantity

Circular MT loopback adapters for testing fiber-optic array cables

4

Circular MT loopback connectors for testing TXP-F13 ports and TXP-T1600 ports

4

Cleaner adapters for the TXP-F13 ports and TXP-T1600 portss

10

Cleaner connectors for the fiber-optic array cables

10

Dry cloth optical cleaners

5

Table 7: TX Matrix Plus Tool Box Parts List for TXP-F13-3D SIBs and TXP-LCC-3D SIBs

Part

Quantity

Optical Loopback for testing TXP-F13-3D SIB ports and TXP-LCC-3D SIB ports

1

Phillips (+) screwdriver, number 2

1

7/16-in.(11 mm) nut driver

1

Juniper product ROHS and warranty documents

1

Dry cloth optical cleaners

5