Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Reinstalling the T320 Control Boards

    To reinstall the control boards (see Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to an approved site ESD grounding point. See the instructions for your site.
    2. Carefully align the sides of the control board with the guides inside the chassis.
    3. Slide the control board into the chassis, carefully ensuring that it is correctly aligned.
    4. Grasp both ejector handles and press them inward to seat the control board.
    5. Tighten the captive screws on the ejector handles, using a Phillips (+) screwdriver, number 2.
    6. Repeat the procedure to reinstall the remaining control board.

    Figure 1: Reinstalling a Control Board

    Image g002020.gif

    Published: 2011-07-27