Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Removing a JCS1200 Switch Module or Module Filler

    Figure 1 shows how to remove and install a switch module.

    Figure 1: Removing and Installing a JCS1200 Switch Module

    Removing and Installing
a JCS1200 Switch Module

    To remove a switch module or module filler (see Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Pull the release handle to the open position. The module moves out of the bay approximately 0.25 in. (0.6 cm).
    3. Slide the switch module out of the bay.

    Published: 2013-01-30