Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Unpacking the SRX3400 Services Gateway


The services gateway is shipped in a cardboard carton. The SRX3400 Services Gateway Getting Started Guide and an accessory box are also included in the shipping carton.

The shipping container measures 11 in. (28 cm) high, 24.1 in. (61 cm) wide, and 33.6 in. (85 cm) deep. The system and its packaging have a total weight of 62 lb (42.2 kg).


The services gateway is maximally protected inside the shipping carton. Do not unpack it until you are ready to begin installation.

To unpack the services gateway:

  1. Move the shipping carton to a staging area as close to the installation site as possible, where you have enough room to remove the components from the chassis.
  2. Position the shipping carton with the arrows pointing up.
  3. Remove the plastic handle inserts and lift the cardboard cover off the services gateway.
  4. Remove the foam covering the top of the services gateway.
  5. Remove the accessory box, the mounting shelf, and the SRX3400 Services Gateway Getting Started Guide.
    Figure 1: Unpacking the SRX3400 Services Gateway
    Unpacking the SRX3400 Services Gateway
  6. With a person on each side of the carton, carefully lift the services gateway from the carton and place on lift. Remove the bag covering the services gateway.
  7. Verify the parts received against the lists in Verifying Parts Received with the SRX3400 Services Gateway.
  8. Save the shipping carton and packing materials in case you need to move or ship the services gateway at a later time.
  9. To proceed with the installation, see Installing the SRX3400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift.