Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for Rack-Mount Installation

 

This topic provides details on the power supply adapters provided with different models of the SRX210 Services Gateway and the procedure for adjusting the power supply adapter tray to hold the power supply adapter.

The following power supply adapters are provided with the SRX210 Services Gateway:

  • 60-watt power supply adapter for the SRX210 Services Gateway Low Memory and High Memory models

  • 150-watt power supply adapter for the SRX210 Services Gateway with PoE

To adjust the power supply adapter tray:

  • To accommodate the 60-watt power supply, use the two 420–028535 screws to attach the adapter stopper brackets at the point on the chassis marked B.

    Figure 1 shows the adjustments to the power supply adapter tray required for the 60-watt power supply.

    Figure 1: Adjusting the Power Supply Adapter Tray to Accommodate the 60-Watt Power Supply
    Adjusting the
Power Supply Adapter Tray to Accommodate the 60-Watt Power Supply
    1. Location for the adapter stopper brackets in the power supply adapter tray

    2. Fully configured power supply adapter tray

  • To accommodate the 150-watt power supply, use the 420–028535 screw to attach the adapter stopper bracket at the point on the chassis marked A.

    Figure 2 shows the adjustments to the power supply adapter tray required for the 150-watt power supply.

    Figure 2: Adjusting the Power Supply Adapter Tray to Accommodate the 150-Watt Power Supply
    Adjusting the
Power Supply Adapter Tray to Accommodate the 150-Watt Power Supply
    1. Locations for the adapter stopper brackets in the power supply adapter tray

    2. Fully configured power supply adapter tray