Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Adjusting the Power Supply Adapter Tray for the SRX110 Services Gateway for Rack-Mount Installation

 

This topic provides details on the power supply adapter for the SRX110 Services Gateway and the procedure for adjusting the power supply adapter tray to hold the power supply adapter.

A 60-watt power supply adapter is provided with the SRX110 Services Gateway.

To accommodate the 60-watt power supply, use the two 420–028535 screws to attach the adapter stopper brackets at the point on the chassis marked B.

Figure 1 shows the adjustments to the power supply adapter tray required for the 60-watt power supply.

Figure 1: Adjusting the Power Supply Adapter Tray to Accommodate the 60-Watt Power Supply
Adjusting the Power
Supply Adapter Tray to Accommodate the 60-Watt Power Supply
  1. Locations for the adapter stopper brackets in the power supply adapter tray

  2. Fully configured power supply adapter tray