Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot

    Tip: Placing the SRX210 Services Gateway on a flat, level surface, with the Juniper Networks logo facing up, will make it easier to align and insert the 3G ExpressCard in the ExpressCard slot.

    Caution: 3G ExpressCard is not hot-swappable on the SRX210 Services Gateway.

    To install the 3G ExpressCard in the ExpressCard slot on the SRX210 Services Gateway:

    1. Align the 3G ExpressCard as follows:
      • Ensure that the 3G ExpressCard is parallel with the surface on which the SRX210 Services Gateway is placed.
      • Ensure that the center of the 3G ExpressCard is aligned with the center of the ExpressCard slot on the SRX210 Services Gateway.
    2. Study Figure 1, which shows installation of the 3G ExpressCard on the SRX210 Services Gateway.

      Figure 1: Installing the 3G ExpressCard in the SRX210 Services Gateway

      Installing the 3G ExpressCard
in the SRX210 Services Gateway
    3. Insert the 3G ExpressCard slowly and firmly into the ExpressCard slot until the 3G ExpressCard is engaged in the slot as follows:
      • The 3G ExpressCard is designed to fit tightly in the slot. You will encounter two points of resistance while inserting the 3G ExpressCard into the slot. Use firm pressure as you insert the card.
      • You will encounter the first point of resistance when you begin to insert the 3G ExpressCard. After you align the 3G ExpressCard, lift the card slightly and use firm pressure to slide it into the slot.
      • When you have partially inserted the 3G ExpressCard, you will encounter the second point of resistance. Use additional pressure to finish inserting the 3G ExpressCard into the slot.

    Published: 2013-08-01