Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Connecting the T1600 Router to an External Clocking Device

    To connect the router to one or two external clocking devices, connect a cable with RJ-48 connectors to one of the EXTERNAL CLOCK INPUTS ports on the SCG.

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Plug one end of the cable into the appropriate EXTERNAL CLOCK INPUTS port on the SCG.
    3. Plug the other end of the cable into the T1 external clocking device.
    4. Repeat the procedure for the other EXTERNAL CLOCK INPUTS port on the SCG.
    5. Verify that the LINK LED for each port is lit steadily green.
    6. Configure the port. See the synchronization statement for M Series and T Series in the .
    7. Issue the show chassis synchronization command to check the status of the port.
      user@host> show chassis synchronization
      user@host> show chassis synchronization
      
          Clock Synchronization Status :
            Clock module on SCG 0
              Current state            : master
              Current clock state      : locked to external-a
                Selected for           : 2 hours, 28 minutes, 4 seconds
                Selected since         : 2006-02-17 01:12:58 PST
              Configured sources
                Source      Priority   Deviation    Last deviation   Status
                                       (in ppm)     (in ppm)
                external-a  primary    measuring    -0.10            in-use
                external-b  secondary  -0.10        -0.10            qualified
          Clock Synchronization Status :
            Clock module on SCG 1
              Current state            : backup
              Current clock state      : locked to master SCG
                Selected for           : 19 hours, 49 minutes, 14 seconds
                Selected since         : 2006-02-16 07:51:48 PST
              Configured sources
                Source      Priority   Deviation    Last deviation   Status
                                       (in ppm)     (in ppm)
                external-a  primary    -0.25        -0.25            qualified
                external-b  secondary  -0.25        -0.25            qualified
      

    Published: 2013-08-16