Mounting the EX Series Redundant Power System
You can mount the Redundant Power System (RPS) on a 19-in. equipment rack or cabinet by using mounting brackets. The RPS is shipped with mounting brackets and mounting screws to be used to secure the mounting brackets to the RPS chassis.
The RPS is shipped with one pair of mounting brackets. The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.445 cm), so that the RPS can be mounted in any rack that provides holes spaced at that distance.
The outer edges of the mounting brackets extend the width of the RPS to 19 in. (48.2 cm) and the front of the chassis extends approximately 0.5 in. (1.27 cm) beyond the mounting brackets when the RPS is front-mount on a rack.
You can mount an RPS:
On two posts in a 19-in. rack or cabinet by using the mounting brackets provided with the RPS.
On four posts in a 19-in. rack or cabinet by using the separately orderable four-post rack-mount kit.
In a position recessed 2 in. from the front of a 19-in. rack or cabinet by using the 2-in. recess front brackets in the separately orderable four-post rack-mount kit. You can mount the RPS in this recessed position on two-post or four-post racks and cabinets.
Video: Installing the EX Series Redundant Power System