Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Mounting an EX Series Redundant Power System in a Recessed Position in a Rack or Cabinet

 

You can mount a Redundant Power System (RPS) in a rack or cabinet such that the RPS is recessed inside the rack from the rack front by 2 inches. You can use the 2-in.-recess front brackets provided in the separately orderable four-post rack-mount kit to mount the RPS in a recessed position.

You might want to mount the RPS in a recessed position in a cabinet if the cabinet doors do not close completely unless the RPS is recessed.

To mount the RPS in a recessed position on two posts, follow the instructions in Mounting an EX Series Redundant Power System on Two Posts in a Rack or Cabinet. To mount the RPS in a recessed position on four posts, follow the instructions in Mounting an EX Series Redundant Power System on Four Posts in a Rack or Cabinet.

Related Documentation

  • Video: Installing the EX Series Redundant Power System