Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Replacing the Management Ethernet Cable

 

To replace the management Ethernet cable:

  1. Press the tab on the connector on the management Ethernet cable and pull the connector straight out of the port. Figure 1 shows the connector.
  2. Disconnect the cable from the network device.
  3. Plug one end of the replacement Ethernet cable into the MGMT port (see Figure 2).
  4. Plug the other end of the cable into the network device.
Figure 1: Routing Engine Ethernet Cable Connector
Routing Engine
Ethernet Cable Connector
Figure 2: Routing Engine Interface Ports
Routing Engine Interface
Ports