Powering Off the T320 Router
To power off a T320 router:
- On the external management device connected to the Routing
Engine, issue the request system halt both-routing-engines operational mode command. The command shuts down both Routing Engines
cleanly, so their state information is preserved. (If the router contains
only one Routing Engine, issue the request system halt command.)
user@host> request system halt both-routing-engines
For more information about these commands, see request system halt.
- Wait until a message appears on the console confirming
that the operating system has halted.
Halt the system ? [yes,no] (no) yes *** FINAL System shutdown message from root@section2 *** System going down IMMEDIATELY Terminated ... syncing disks... 11 8 done The operating system has halted. Please press any key to reboot.
- Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
- Switch the circuit breakers on each power supply faceplate to the off position (O).