Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Removing the LN1000 Mobile Secure Router
The LN1000 router is hot-swappable; power can be left on while you remove or replace a router module without damage to the router or backplane.
To remove the router from the chassis:
- Using a 3/32 Allen wrench, loosen the two wedge locks on the front panel of the LN1000 router.
- Lift the injector/ejector latch on the right side of the router front panel to disengage the connector on the router from the backplane connector.
- Slide the router out of the guide rails.