Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Replacing the MX2020 Craft Interface

    1. Removing the MX2020 Craft Interface
    2. Installing the MX2020 Craft Interface

    Removing the MX2020 Craft Interface

    To remove the craft interface (see Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Detach any external devices connected to the craft interface.
    3. Loosen the captive screws at the left and right corners of the craft interface faceplate by using the Torx (T10) screwdriver.
    4. Grasp the craft interface faceplate and carefully tilt it toward you until it is horizontal.
    5. Disconnect the ribbon cable from the back of the faceplate by gently pressing on both sides of the latch with your thumb and forefinger. Remove the craft interface from the chassis.

    Figure 1: Removing the Craft Interface

    Removing the
Craft Interface

    Installing the MX2020 Craft Interface

    To install the craft interface (see Figure 2):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Grasp the craft interface with one hand, and hold the bottom edge of the craft interface with the other hand to support its weight.
    3. Orient the ribbon cable so that it plugs into the connector socket. The connector is keyed and can be inserted only one way.
    4. Align the bottom of the craft interface with the sheet metal above the card cage, and press it into place.
    5. Tighten the screws on the left and right corners of the craft interface faceplate by using the Torx (T10) screwdriver.
    6. Reattach any external devices connected to the craft interface.

    Figure 2: Installing the Craft Interface

    Installing
the Craft Interface

    Modified: 2016-03-29