Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Removing the MX2020 Lower Cable Manager

 Note

To accommodate additional clearance, you may order an extended lower cable manager from Juniper Networks.

To remove the lower cable manager (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Loosen the two captive screws on the lower cable manager cover, and remove it.
  3. Using a Phillips (+) screwdriver (number 1 or 2), loosen the mounting screws on the lower cable manager.
  4. Grasp the lower cable manager, and pull it straight out from the studs on the front of the chassis.
Figure 1: Removing the Standard Lower Cable Manager
Removing the Standard Lower
Cable Manager