Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Removing the MX2020 DC Cable Manager

 

To remove the standard DC cable manager (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to an approved site ESD grounding point. See the instructions for your site.
  2. Grasp the DC cable manager, lift up and pull straight out from the DC PDM on the rear of the chassis.
  3. Place the DC cable manager into an electrostatic bag and set it aside.
Figure 1: Removing the Standard DC Cable Manager
Removing the Standard DC Cable
Manager

To remove the cable manager for the DC PDM (240 V China) and the universal (HVAC/HVDC) PDM (see Figure 2):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to an approved site ESD grounding point. See the instructions for your site.
  2. Using a screwdriver, loosen the two screws on each side of the cable manager (see Figure 2
    Figure 2: Removing the DC Cable Manager for DC PDM (240 V China) and the Universal (HVAC/HVDC) PDM
    Removing the DC
Cable Manager for DC PDM (240 V China) and the Universal (HVAC/HVDC)
PDM
  3. Grasp the DC cable manager, lift up and pull straight out from the DC PDM on the rear of the chassis.
  4. Place the DC cable manager into an electrostatic bag and set it aside.