Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Preparing the SRX110 Services Gateway for Rack-Mount Installation


You can mount an SRX110 Services Gateway on 4-post (telco) racks, enclosed cabinets, and open-frame racks.


The SRX110 Services Gateway cannot be center-mounted in a rack.

Table 1 lists the tasks you need to perform before installing the device.

Table 1: SRX110 Services Gateway Preinstallation Checklist for Rack-Mount Installation


Additional Information

Verify that the site meets the requirements.

Site Preparation Checklist for the SRX110 Services Gateway

Verify that the racks or cabinets meet the specific requirements.

SRX110 Services Gateway Rack Requirements

Place the rack or cabinet in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.

Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services Gateway

Remove the services gateway chassis from the shipping carton.

Unpacking the SRX110 Services Gateway

Verify that you have the following parts available in your rack-mounting kit for the SRX110 Services Gateway:

  • Rack-mounting brackets

  • Mounting screws

  • Power supply adapter tray with screws

  • Adapter stopper bracket


Adjust the power supply adapter tray.

Adjusting the Power Supply Adapter Tray for the SRX110 Services Gateway for Rack-Mount Installation


The rack-mounting kit is not shipped with the device and must be ordered separately.