Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing the Mounting Hardware for the SRX1400 Services Gateway

 

The specific mounting hardware used depends on the type of rack you are using. Follow the appropriate steps for your rack to install the mounting hardware.

To install the mounting hardware:

  1. Locate the rack-mounting brackets in the accessory kit.
  2. Position a mounting bracket on each side of the chassis. You can position the brackets in front-mount or rear-mount position.
  3. Use the screws provided to secure the rack-mounting brackets to the sides of the chassis as shown in Figure 1.
    Figure 1: Attaching Mounting Brackets to the SRX1400 Services Gateway
    Attaching Mounting
Brackets to the SRX1400 Services Gateway