[an error occurred while processing this directive][an error occurred while processing this directive]

Replacing a T640 Power Supply Filter Element

To replace a power supply filter element (see Figure 1):

  1. Grasp the filter cover on the power supply faceplate and pull it straight off the power supply.
  2. Remove the filter element.
  3. Install a new filter element.
  4. Press the filter cover straight onto the power supply faceplate until all four sides click into place.

Figure 1: Replacing the Power Supply Filter Cover

Image g001571.gif

Published: 2009-11-25

[an error occurred while processing this directive]