Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Replacing a T640 Six-Input DC Power Supply Front Air Filter

 

  1. Removing a T640 Six-Input DC Power Supply Front Air Filter

  2. Installing a T640 Six-Input DC Power Supply Front Air Filter

Removing a T640 Six-Input DC Power Supply Front Air Filter

To remove a six-input DC power supply :

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Grasp the filter cover on the power supply faceplate, and pull it straight off the power supply.
  3. Remove the air filter.

Installing a T640 Six-Input DC Power Supply Front Air Filter

To install a six-input DC power supply front filter element:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Install a new filter element.
  3. Press the filter cover straight onto the power supply faceplate until all four sides click into place.

Related Documentation