Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Replacing a T1600 Six-Input DC Power Supply Side Air Filter

 
  1. Removing a T1600 Six-Input DC Power Supply Side Air Filter

  2. Installing a T1600 Six-Input DC Power Supply Side Air Filter

Removing a T1600 Six-Input DC Power Supply Side Air Filter

To remove a six-input DC power supply side air filter element:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Loosen the captive screw.
  3. Slide the air filter cover until the two lances leave the sheet metal.
  4. Remove the air filter cover hooks from the rectangle holes in the sheet metal.
  5. Remove the side air filter element from the air filter cover.
Figure 1: Removing the Power Supply Side Air Filter
Removing
the Power Supply Side Air Filter

Installing a T1600 Six-Input DC Power Supply Side Air Filter

To install a six-input DC power supply side air filter element:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Install a new side filter element into the side air filter cover.
  3. Insert the side air filter cover hooks into the rectangle holes in the sheet metal.
  4. Slide the side air filter cover back into the power supply faceplate. The two lances insert into the sheet metal.
  5. Tighten the captive screw.
Figure 2: Installing the Power Supply Side Air Filter
Installing
the Power Supply Side Air Filter