Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Replacing a Front Air Filter on a T1600 AC or Three-Input 240-A or Four-Input 240-A DC Power Supply

 

You can use this procedure for a three-input 240-A DC power supply, four-input 240-A DC power supply, three-phase delta AC power supply, or three-phase wye AC power supply.

  1. Removing a Front Air Filter on a T1600 AC or Three-Input 240-A or Four-Input 240-A DC Power Supply

  2. Installing a Front Air Filter on a T1600 AC or Three-Input 240-A or Four-Input 240-A DC Power Supply

Removing a Front Air Filter on a T1600 AC or Three-Input 240-A or Four-Input 240-A DC Power Supply

To remove a power supply front air filter element (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Grasp the filter cover on the power supply faceplate and pull it straight off the power supply.
  3. Remove the front air filter element.
Figure 1: Removing a Front Air Filter Element
Removing
a Front Air Filter Element

Installing a Front Air Filter on a T1600 AC or Three-Input 240-A or Four-Input 240-A DC Power Supply

To install a power supply front filter element (see Figure 2):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Install a new filter element.
  3. Press the filter cover straight onto the power supply faceplate until all four sides click into place.
Figure 2: Installing a Front Air Filter Element
Installing
a Front Air Filter Element