Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Replacing a PC Card in a T1600 Routing Engine

 
  1. Removing a T1600 PC Card

  2. Installing the T1600 PC Card

Removing a T1600 PC Card

The PC Card is inserted into the slot labeled PC CARD on the Routing Engine. To remove the PC Card (see Figure 1):

  1. Place an electrostatic bag or antistatic mat on a flat, stable surface.
  2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  3. Remove the Routing Engine cover by loosening the captive screws on the corners of its faceplate.
  4. On the Routing Engine faceplate, press the eject button on the right side of the PC Card slot once to release the button. Press again to release the PC Card.Note

    The Routing Engine in your router might have two PC Card slots. In this case, use either slot. Do not install more than one PC Card in the Routing Engine.

  5. The PC Card pops partially out of the slot. Grasp the card and pull it completely out of the slot.
  6. Place the PC Card on the antistatic mat.
  7. If you are not replacing the PC Card now, reinstall the Routing Engine cover and tighten the screws on the corners of the cover to secure it to the chassis.
Figure 1: Removing a PC Card
Removing a PC Card

Installing the T1600 PC Card

To install a PC Card (see Figure 2):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. If the Routing Engine cover is in place, remove the cover by loosening the captive screws on the corners of its faceplate.
  3. Insert the PC Card into the PC Card slot on the Routing Engine, with the Juniper Networks logo facing downward.Caution

    Be sure to insert the PC Card with the label facing downward. Inserting the PC Card incorrectly might damage the Routing Engine.

    Note

    The Routing Engine 1600 has two PC Card slots. In this case, use either slot. Do not install more than one PC Card in the Routing Engine.

  4. Press the card firmly all the way into the slot.
  5. Reinstall the Routing Engine cover and tighten the screws on the corners of the cover to secure it to the chassis.
Figure 2: Installing a PC Card
Installing a PC Card