Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Removing the M40e PC Card

    The PC Card is inserted in the slot labeled PC CARD in the Routing Engine faceplate. To remove the PC Card (see Figure 1):

    1. Remove the rear component cover by loosening the thumbscrew at each corner of the cover and pulling it straight off the chassis. For complete instructions, see Removing Components from the Chassis Before Installing the M40e Router Without a Lift.
    2. Press the eject button located next to the PC Card slot in the Routing Engine faceplate. Note that the PC Card slot might be located in a different position from that shown in Figure 1.
    3. When the PC Card pops partially out of the slot, grasp the card and pull it straight out of the slot.

    Figure 1: Removing the PC Card

    Image g001926.gif

    Published: 2010-10-28