Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Inserting the M40e PC Card

    To insert the PC Card (see Figure 1):

    1. Orient the PC Card with the Juniper Networks logo facing in the direction specified on the Routing Engine faceplate. Insert the card into the slot.
    2. Press the card firmly all the way into the slot. Note that the PC Card slot might be located in a different position from that shown in Figure 1.
    3. Reinstall the rear component cover and tighten the thumbscrew at each corner to secure it to the chassis. For complete instructions, see Reinstalling the M40e Components into the Chassis.

      Caution: To maintain proper airflow and provide electromagnetic shielding, do not operate the router without the rear component cover in place.

    Figure 1: Inserting the PC Card

    Image g001925.gif

    Published: 2010-10-28