Related Documentation
- MX Series
- MX2010 Three-Phase Wye AC Power Distribution Module Description
- Connecting AC Power to a MX2010 Router with Three-Phase Wye AC Power Distribution Modules
- Powering On the AC-Powered MX2010 Router
- MX2010 AC Power System Electrical Specifications
- MX2010 AC Power Cord Specifications
- Preventing Electrostatic Discharge Damage to an MX2010 Router
Mapping Input Power from Three-Phase Wye AC Power Distribution Modules to AC Power Supply Modules on the MX2010 Router
You connect AC power to the router with three-phase wye AC PDMs by connecting two AC power cords in such a way that input #1 cord is capable of supplying power to six PSMs and input #2 is capable of supplying power to three PSMs (this is to match the internals of the PDM where one feed gets mapped to six PSMs and the other gets mapped to three PSMs), (see Figure 1). Table 1 shows the three-phase wye AC PDM input mapping to AC PDM0 and PDM1.
Figure 1: Mapping AC Three-Phase Wye Power Distribution Modules Input to AC Power Supply Modules
Table 1: Input AC Power Mapping for Three-Phase Wye PDM0 and PDM1
INP0/0–LEFT (PDM0-input #2) | INP0/0–RIGHT (PDM0-input #1) | INP1/1–LEFT (PDM1-input #1) | INP1/1–RIGHT (PDM1-input #2) |
|---|---|---|---|
PSM0 | PSM3 | PSM0 | PSM6 |
PSM1 | PSM4 | PSM1 | PSM7 |
PSM2 | PSM5 | PSM2 | PSM8 |
PSM6 | PSM3 | ||
PSM7 | PSM4 | ||
PSM8 | PSM5 |
Related Documentation
- MX Series
- MX2010 Three-Phase Wye AC Power Distribution Module Description
- Connecting AC Power to a MX2010 Router with Three-Phase Wye AC Power Distribution Modules
- Powering On the AC-Powered MX2010 Router
- MX2010 AC Power System Electrical Specifications
- MX2010 AC Power Cord Specifications
- Preventing Electrostatic Discharge Damage to an MX2010 Router
