Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Removing a JCS1200 Media Tray

    Figure 1 shows how to remove a media tray.

    Figure 1: Removing a JCS1200 Media Tray

    Removing a JCS1200 Media

    To remove a media tray (see Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Pull the media tray release handle to the open position. The media tray moves out of the bay approximately 0.25 in. (0.6 cm).
    3. Slide the media tray out of the bay.

    Published: 2013-01-30