Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
M Series Search
Related Documentation
Installing the M40e Mounting Hardware for a Four-Post Rack
To prepare to mount the router into a four-post rack or cabinet:
Installing Cage Nuts, If Needed
Install cage nuts, if needed:
- On each front rack rail, install a cage nut 0.88 in. (2.2 cm) up from the bottom of a U division.
- Insert a cage nut behind each hole where you plan to install the flanges of the mounting shelf.
Installing the Mounting Shelf in a Four-Post Rack or Cabinet
To install the mounting shelf:
- On the front of each front rack rail, partially insert a mounting screw 0.88 in. (2.2 cm) up from the bottom of a U division.
- Install the shelf on the front rack rails. Rest the bottom slot of each flange on one of the mounting screws.
- Partially insert a mounting screw into the top hole in each flange of the shelf.
- Tighten all the screws completely.
Removing the Center-Mounting Brackets
To remove the center-mounting brackets:
- Loosen the screws at the top and bottom of each bracket.
- Remove the brackets from both sides of the chassis.
