Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Powering Off the M320 Router

 

To power off a M320 Router:

  1. On the external management device connected to the Routing Engine, issue the request system halt both-routing-engines operational mode command. The command shuts down both Routing Engines cleanly, so their state information is preserved. (If the router contains only one Routing Engine, issue the request system halt command.)
    user@host> request system halt both-routing-engines

    For more information about these commands, see request system halt.

  2. Wait until a message appears on the console confirming that the operating system has halted.
  3. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  4. Switch the circuit breaker on each DC power supply faceplate to the off position (O). Switch the power switch on each AC power supply faceplate to the off position (O).