Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Packing a Line Card Used in an EX9200 Switch

    If you are returning a line card to Juniper Networks for repair or replacement, pack it as described in this topic.

    Before you begin packing a line card:

    Caution: Do not stack line cards on top of one another or on top of any other component. Place each line card separately in an antistatic bag.

    To pack a line card:

    1. Place the line card in the antistatic bag.
    2. Place the line card in the shipping carton.
    3. Place the packing foam on top of and around the line card.
    4. Close the top of the cardboard shipping box and seal it with packing tape.
    5. Write the RMA number on the exterior of the box to ensure proper tracking.

    Published: 2015-01-27