Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Removing Components from the JCS1200 Platform

    Before lifting the JCS1200 platform, you must remove the following components:

    • Fan modules
    • Fan shuttle
    • Management modules
    • Media trays
    • Power modules
    • Routing Engines
    • Switch modules

    Note: For detailed instructions on removing JCS1200 components, see the removal procedures for each component.

    To remove the components from the JCS1200 platform:

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Slide each component out of the chassis evenly so that it does not become stuck or damaged.
    3. Label each component as you remove it so you can reinstall it in the correct location.
    4. Immediately store each removed component in an electrostatic bag.
    5. Do not stack removed components. Lay each one on a flat surface.

    Published: 2013-01-30