Technical Documentation

Installing a JCS 1200 MUX Card

Figure 1 shows how to remove and install a multiplexer (MUX) card.

Figure 1: Removing and Installing a JCS 1200 MUX Card

Image bb1cp044.gif

To install a MUX card (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Make sure that the release handle on the MUX card is in the open position.
  3. Slide the MUX card into the bay until it stops.
  4. Push the release handle to the closed position.