Technical Documentation

Removing a JCS 1200 Media Tray

Figure 1 shows how to remove a media tray.

Figure 1: Removing a JCS 1200 Media Tray

Image bb1cp037.gif

To remove a media tray (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Pull the media tray release handle to the open position. The media tray moves out of the bay approximately 0.25 in. (0.6 cm).
  3. Slide the media tray out of the bay.