[an error occurred while processing this directive] [an error occurred while processing this directive]

Removing the JCS 1200 Cable Management Trays Without a Bezel

Figure 1 shows how to remove and install the cable management trays.

Figure 1: Removing and Installing the JCS 1200 Cable Management Trays

Image bb1cp060.gif

The cable management trays can be removed with or without the JCS 1200 bezel. If you are removing the JCS 1200 bezel, see Removing a JCS 1200 Bezel more information.

To remove the cable management trays that are installed without the JCS 1200 bezel (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Hold the cable management tray with one hand and use a Phillips-head screwdriver to loosen the captured thumb screws that attach the cable management tray to the JCS 1200 platform.
  3. Pull the cable management tray away from the JCS 1200 platform.
  4. Repeat these steps for the other cable management tray.
[an error occurred while processing this directive]