Technical Documentation

Removing a JCS 1200 Bezel

If the JCS 1200 bezel option is installed on your JCS 1200 platform, you must first remove the bezel to access any devices installed into the front of your JCS 1200 platform.

Figure 1 shows how to remove a bezel.

Figure 1: Removing a JCS 1200 Bezel

Image bb1da003.gif

To remove a bezel (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Hold the bezel and press the blue release button on each side of the bezel.
  3. Pull the bezel away from the JCS 1200 platform.
  4. If you are instructed to return the bezel, follow all packaging instructions and use any packaging materials for shipping that are supplied to you.