Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing the MX2020 Upper Cable Manager

 Note

To accommodate additional clearance, you may order an extended upper cable manager from Juniper Networks.

To install the upper cable manager (see Figure 1):

  1. Position the upper cable manager on the studs on the upper front of the chassis, just below the craft interface.
  2. Insert the screws into the corners in the upper cable manager onto the studs on the chassis.
  3. Using a Phillips (+) screwdriver (number 1 or 2), tighten the mounting screws securely.
  4. Replace the cable manager cover, and secure the two captive screws.
Figure 1: Installing the Standard Upper Cable Manager
Installing
the Standard Upper Cable Manager