Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing the MX2020 Lower Cable Manager

 Note

To accommodate additional clearance, you may order an extended lower cable manager from Juniper Networks.

To install the lower cable manager (see Figure 1):

  1. Position the lower cable manager on the studs on the lower front of the chassis, just below the MPCs.
  2. Insert the screws into the corners in the lower cable manager onto the studs on the chassis.
  3. Using a Phillips (+) screwdriver (number 1 or 2), tighten the mounting screws securely.
  4. Replace the cable manager cover, and secure it with the two captive screws.
Figure 1: Installing the Standard Lower Cable Manager
Installing the Standard
Lower Cable Manager