Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing the MX2020 DC Cable Manager

 Note

To accommodate additional clearance, you may order an extended DC cable manager from Juniper Networks.

To install the DC cable manager (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Position the DC cable manager over the two slots located on both sides of the DC PDM.
  3. Lift the DC cable manager slightly up while inserting the two flanges into the slots on both sides of the DC PDM.
  4. Push down to secure the DC cable manager in place.
Figure 1: Installing the Standard DC Cable Manager
Installing the Standard DC
Cable Manager