Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing an M10i HCM

 

To install an HCM (see Figure 1 and Figure 2):

  1. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Place one hand under the HCM to support it and grasp the handle on the faceplate with the other hand.
  3. Align the rear of the HCM with the guide rails inside the chassis and slide it in completely.Caution

    Align the HCM carefully with the guide rails and push it in evenly. Damage can result if it gets lodged in the rails because of uneven movement.

  4. Place one hand under the Routing Engine to support it and grasp the handle on the faceplate with the other hand.
  5. Align the rear of the Routing Engine with the guide rails inside the chassis and slide it in completely.Caution

    Align the Routing Engine carefully with the guide rails and push it in evenly. Damage can result if it gets lodged in the rails because of uneven movement.

  6. Tighten the thumbscrews on the Routing Engine faceplate to secure the Routing Engine.
  7. Issue the show chassis hardware command to verify that the HCM is functioning correctly.
Figure 1: Installing the HCM
Installing the HCM
Figure 2: Installing a Routing Engine
Installing a Routing
Engine