Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing an MX960 Fan Tray

 

To install a fan tray (see Figure 1 and Figure 2):

  1. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other end of the strap to an ESD point.
  2. Grasp the fan tray on each side, and insert it straight into the chassis. Note the correct orientation by the "this side up" label on the top surface of the fan tray.
  3. Tighten the captive screws on each side of the fan tray faceplate to secure it in the chassis.
  4. Lower the cable manager back into position, if necessary.
Figure 1: Installing an Upper Fan Tray
Installing an
Upper Fan Tray
Figure 2: Installing a Lower Fan Tray
Installing
a Lower Fan Tray