Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Installing an M10i Fan Tray


To install a fan tray (see Figure 1):


For proper airflow, the primary fan tray should be installed in slot 1, on the left rear of the chassis. The redundant fan tray should be installed in slot 0 on the right.

  1. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Grasp the handle on the faceplate of the fan tray with one hand and place the other hand under the unit to support it. Orient the fan tray so that the thumbscrew is at the top of the tray.
  3. Slide the tray into the slot.
  4. Tighten the thumbscrew to seat the fan tray firmly in the chassis.
Figure 1: Installing a Fan Tray
Installing a Fan Tray