Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing and Removing EX9204 Switch Hardware Components

 

The field-replaceable units (FRUs) in an EX9204 switch are:

  • Routing Engine module (RE module)

  • Switch Fabric module (SF module)

  • Power supplies (AC and DC)

  • Fan tray

  • Line cards

  • SFP, SFP+, QSFP+, and CFP transceivers

The RE module and SF module are hot-removable or hot-pluggable depending on the configuration of the switch. See EX9204 Switch Configurations.

All the line cards are hot-removable and hot-insertable. However, we recommend that you take them offline before removing them.

The AC and DC power supplies, fan tray, and the SFP, SFP+, and QSFP+ transceivers in EX9200 switches are hot-removable and hot-insertable FRUs: You can remove and replace them without powering off the switch or disrupting switch functions.

To install an RE module in an EX9204 switch, follow instructions in Installing an RE Module in an EX9200 Switch. To remove an RE module from an EX9204 switch, follow instructions in Removing an RE Module from an EX9200 Switch.

To install an SF module in an EX9204 switch, follow instructions in Installing an SF Module in an EX9200 Switch. To remove an SF module from an EX9204 switch, follow instructions in Removing an SF Module from an EX9200 Switch.

To install a line card in an EX9204 switch, follow instructions in Installing a Line Card in an EX9200 Switch. To remove a line card in an EX9204 switch, follow instructions in Removing a Line Card from an EX9200 Switch.

To install an AC power supply in an EX9204 switch, follow instructions in Installing an AC Power Supply in an EX9204 Switch. To remove a power supply from an EX9204 switch, follow instructions in Removing an AC Power Supply from an EX9204 Switch.

To install a DC power supply in an EX9204 switch, follow instructions in Installing a DC Power Supply in an EX9204 Switch. To remove a DC power supply from an EX9204 switch, follow instructions in Removing a DC Power Supply from an EX9204 Switch.

To install a fan tray in an EX9204 switch, follow instructions in Installing a Fan Tray in an EX9200 Switch. To remove a fan tray from an EX9204 switch, follow instructions in Removing a Fan Tray from an EX9200 Switch.

To install a transceiver in an EX9204 switch, follow instructions in Installing a Transceiver. To remove a transceiver from an EX9204 switch, follow instructions in Removing a Transceiver.