Installing and Connecting an EX4200 Switch

 

The EX4200 switch chassis is a rigid sheet-metal structure that houses the hardware components.

To install and connect an EX4200 switch:

  1. Follow instructions in Unpacking an EX4200 Switch.
  2. Install a power supply if it is not pre-installed; see Installing a Power Supply in an EX4200 Switch.
  3. Install a fan tray if it is not pre-installed; see Installing a Fan Tray in an EX4200 Switch.
  4. Mount the switch by following instructions appropriate for your site:

  5. Follow instructions in Connecting Earth Ground to an EX Series Switch.
  6. Follow instructions for connecting power as appropriate for your site:

  7. Perform initial configuration of the switch by following instructions in Connecting and Configuring an EX Series Switch (CLI Procedure) or Connecting and Configuring an EX Series Switch (J-Web Procedure).
  8. Set the switch’s management options by following the appropriate instructions: