Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing and Removing EX3200 Switch Hardware Components

 

The EX3200 switch chassis is a rigid sheet-metal structure that houses the hardware components. The field-replaceable units (FRUs) in EX3200 switches are:

  • Power supply

  • Fan tray

  • Uplink module

  • SFP transceiver

  • SFP+ transceiver

  • XFP transceiver

The fan tray, uplink module, and transceivers are hot-removable and hot-insertable: You can remove and replace them without powering off the switch or disrupting switch functions.

To install a power supply in an EX3200 switch, follow instructions in Installing a Power Supply in an EX3200 Switch. To remove a power supply from an EX3200 switch, follow instructions in Removing a Power Supply from an EX3200 Switch.

To install a fan tray in an EX3200 switch, follow instructions in Installing a Fan Tray in an EX3200 Switch. To remove a fan tray from an EX3200 switch, follow instructions in Removing a Fan Tray from an EX3200 Switch.

To install an uplink module in an EX3200 switch, follow instructions in Installing an Uplink Module in an EX3200 Switch. To remove an uplink module from an EX3200 switch, follow instructions in Removing an Uplink Module from an EX3200 Switch.

To install an SFP, SFP+, or XFP transceiver in an EX3200 switch, follow instructions in Installing a Transceiver. To remove an SFP, SFP+, or XFP transceiver from an EX3200 switch, follow instructions in Removing a Transceiver.