Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Preparing the SRX110 Services Gateway for Desk-Mount Installation

 

You can mount the services gateway on a desk or other level surface horizontally or vertically. The four rubber feet attached to the chassis provide stability.

Table 1 provides the list of tasks you need to perform before installing the device.

Table 1: SRX110 Services Gateway Preinstallation Checklist for Desk-Mount Installation

Task

Additional Information

Verify that the site meets the requirements.

Site Preparation Checklist for the SRX110 Services Gateway

Place the desk in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.

Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services Gateway

Remove the services gateway chassis from the shipping carton.

Unpacking the SRX110 Services Gateway

Verify that you have the following parts available in your desk-mounting kit to mount the SRX110 Services Gateway vertically:

  • Vertical stand

  • Screws

Note

If you are mounting the services gateway horizontally on a desk, ensure that the rubber feet are attached to the chassis.

Note

The vertical desk-mounting kit is not shipped with the device and must be ordered separately.