Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Preparing the SRX100 Services Gateway for Desk-Mount Installation

 

You can mount an SRX100 Services Gateway on a desk or other level surface horizontally or vertically. The four rubber feet attached to the chassis provide stability.

Before mounting an SRX100 Services Gateway on a desk or other level surface:

  • Verify that the site meets the requirements described in the site preparation checklist.

  • Place the desk in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.

  • Remove the services gateway chassis from the shipping carton. For unpacking instructions, see Unpacking the SRX100 Services Gateway.

  • If you are mounting the device vertically on the desk, make sure that the following parts are available in your vertical desk-mounting kit for the SRX100 Services Gateway:

    • Vertical stand

    • Screws

Note

The vertical desk-mounting kit is not shipped with the device and must be ordered separately.