Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- M Series
- Understanding the Craft Interface
- MX Series
- Understanding the Craft Interface
- T Series
- Understanding the Craft Interface
Replacing the T320, T640, and T1600 Router Craft Interface
The craft interface is located on the front of the chassis above the FPC card cage.
To remove the craft interface:
 | Note: Removing the front upper fan tray before you remove the craft interface might make it easier to grasp the craft interface as you remove it. For instructions on removing a front fan tray, see the appropriate router hardware guide. |
- Attach an ESD strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
- Completely loosen the screws at the four corners of the craft interface.
- Insert the blade of a flat-blade screwdriver into the slot on one side of the craft interface, then gently pry that side out from the chassis.
- Repeat Step 3 for the other side of the craft interface.
- Grasp the craft interface by the top and bottom edges and carefully pull it straight out of the chassis.
Related Documentation
- M Series
- Understanding the Craft Interface
- MX Series
- Understanding the Craft Interface
- T Series
- Understanding the Craft Interface
