Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    Replacing the M40 Router Craft Interface

    The craft interface is attached to the lower impeller tray.

    1. Attach an ESD strap to your bare wrist, and connect the strap to one of the two ESD points on the chassis.
    2. Unscrew the three screws at the bottom edge of the lower impeller tray.
    3. Grasp the sides of the lower impeller tray and slide it out of the chassis. (See Figure 1.)

    Figure 1: Removing the Lower Impeller Tray

    Removing the Lower
Impeller Tray
     
     

    Published: 2012-08-20