Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing the SRX1400 Services Gateway in a Rack or Cabinet Manually

 

If you cannot use a mechanical lift to install the SRX1400 Services Gateway (the preferred method), you can install it manually. Before installing the services gateway manually, you must first remove components from the chassis, and you must reinstall the components once the services gateway is installed in the rack.

Note

We recommend removing the components from the chassis before installing to prevent damage to the components.

At least two people are needed to safely lift the chassis into the rack or cabinet. With components removed, the chassis weighs approximately 23.30 lb (10.57 kg).

Caution

If a slot is not occupied by a card, you must install a blank panel to shield the empty slot to prevent foreign objects from damaging the exposed electronics.

Before installing the services gateway in the rack:

Installing the SRX1400 Services Gateway in a rack or cabinet Manually involves the following steps:

  1. Remove the components from chassis to reduce the weight. For more information, see Removing Components from the Chassis for Manual Lifting of the SRX1400 Services Gateway .
  2. Lift the chassis into a rack. For more information, see Lifting the SRX1400 Services Gateway Chassis into a Rack .
  3. Reinstall the components into the SRX1400 Services Gateway chassis. For more information, see Reinstalling Components into the SRX1400 Services Gateway Chassis.