Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing the SRX5600 Services Gateway Cable Management Brackets

    The cable management brackets attach to both sides of the card cage. To install the cable management brackets (see Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Position the cable management brackets on the front sides of the chassis.
    3. Insert the tabs into the slots.
    4. Tighten the captive screws completely.

    Figure 1: Installing the Cable Management Brackets

    Installing the Cable
Management Brackets

    Published: 2013-01-18